The options are "On", "Off", and "Off and Locked." The default value is "Off and Locked" and must be changed to "On" before the firmware can be updated.
Instructions for the HP Laser Jet 3052/3055 Printer Flash Firmware Update using Microsoft Windows 32 and 64 bit operating systems: Flash Firmware Update Notes: • The Firmware Update Utility can use a USB connection to the printer.
• The HP print driver software must be installed prior to using this utility.
There are, however, separate upgrade utilities for the LJ3050, LJ3052/55 and LJ3390/92.
The file names are listed above in the File Names section.
Fixes/Enhancements These changes are implemented in firmware date code 20070331 (Rev G).
This utility is for use on Microsoft Windows 32 and 64 bit operating systems. Be sure to use the firmware update utility that is specific to your printer model.
This update is recommended for the HP Laser Jet 3052/3055 Printer that have a firmware version older than the one posted This utility updates the printer firmware version to the latest version.
The firmware version can be found on the Self Test/Configuration Page which can be printed from the printer's Reports menu HP Laser Jet 3052/3055 Printer Firmware Enhancements and Fix List This firmware update includes the following enhancements and fixes: 1.
Added the "RFU" item to the "Setup Menu" to control remote firmware updates.
• Depending on the processor speed of your pc, the firmware update process may complete on the printer before the update status progress bar in the flash firmware update utility on the pc screen completes, this is normal. If it is desired to verify the update, use the control panel reports menu under setup, to print a configuration report.
• Once the update process has started, do not use your pc for any other activity until the process is complete. The progress bar will begin to move to the right indicating information being transferred. DO NOT power cycle the product or the pc during this process or the product may become unstable and or unusable without further attention from HP. During the product flash firmware update, the display on the product control panel will display "Erasing - Programming - Complete - Hewlett-Packard - Ready - Initializing - Ready". The configuration report will show the current firmware revision in the Product information block.